Question about DSP4210GM 42 in. Plasma Television
...42" plasma tv will not show a picture or anything else. We were told the power supply was bad but the tv's power button will turn on and off. When we turn it on lines appear for a second then just a ...
inch inside the left side of the tv. Any idea what could be causing it? sounds like a panel defect or a loose ribbon cable, but more than likely it's the panel itself I agree with Lukster, 9 times out
...inch plasma screen cracked by my grandson. Can it be fixed Your are probably pooched, and repairing this would be expensive. Plasma display panels are constructed as a pair of glass panels spaced ...
...42" Plasma tv with a broken screen?? (Samsung 42") Theoretically yes functionally no. Not unless the parts are the same, chack the model numbers of the plasma screens. If they match you can change ...
42 inch plasma, EDTV, Daewoo, 1 and a half old, bought new. I had the same problem with the flicker. Mine was a Flicker followed by a greenish line through the screen. It got worse then after 2 months
Question about DP42SM 42 in. HD-Ready Plasma Television
...42 in. HDTV-Ready Plasma Television works great but has a 4 inch black line in center of tv. Can it be repaired? If so what do I need to do? whit my tv turn on picture is good pas 15 minutes all ...
Question about DSP4210GM 42 in. Plasma Television
...on the right of my 42 inch plasma made by Daewoo. Can see picture fine with the exception of this disturbance. See if you can center the picture in the setup menu. It sounds like it's just off
...PLASMA TV MONITOR, MODEL NUMBER DP-42 SM. I GET A GOOD PICTURE AND AFTER A FEW MINUTES THE SCREEN TURNS PINK. MODEL WAS FROM 2003. ANY IDEAS? Sounds like your panel might be going out or a faulty ...
Question about DSP4210GM 42 in. Plasma Television
42 inch Philips Brilliance 420p monitor which ive been using for the past 2 years as a Tv. Just recently it has been slow starting up and keeps going onto standby - eventually after clicking it on/off
Question about DP42SM 42 in. HD-Ready Plasma Television
problems with signal with some channels on tv Digital TV has a weaker signal. Try a better antenna. Check cables
Usually answered in minutes!
84 Questions
75 Questions
48 Questions
43 Questions
38 Questions