Questions & Answers for: Nintendo DS pin trap

bent or missing pin in game connecter getting error code, looks like a pin is missing in slot is there a repair? If there is a pin missing, call an expert or take it to an electronics store. There you

...have become trapped in the microphone, have you tried gently feeling inside the microphone with a pin? It may be some dust clogging it. Good luck with that. ...

ds lite does not detect games,was fine the pins in the game slot might be bent (shine a light in the slot and use a needle or pin to straighten any bent pins) or the pins might be dirty. slide ...

broken ds lite. the games were inserted into slot 1 the wrong way round. the pins are bent. The part with the damaged pins is the slot-1 port. I know it seems rediculous, but this part is too ...

...not read DS games but will read Gameboy games. To my knowledge, the DS has not gotten wet. Some pins were bent in my son's DS. I used a mini LED light and an open paper clip as a pick to bend

ds lite pins pins in my ds lite are not staight so it wont read cards how to straight them??????????? From outside is pretty difficult to straight the slot 1 pins as it is small and you need very thin

nintendo ds bent pins The part with the damaged pins is the slot-1 port. I know it seems rediculous, but this part is too impractical for most people to attempt a repair. However, if you are savvy ...

...Will say no cartridge?? This is a very common problem and is usually due to either dirty orcorroded pins in the game slot or a bent pin. Sometimes it can be the game contacts are a bit dirty but if ...

i replaced the housing screens come on but no picture only sound If you have replaced the housing make sure you havnt trapped any of the screen cables and make sure they are plugged in properly.

...on floor seven of the tower, to make seven squares? solution please Hi Gill For square 1, use pins 1 and 2 from row 1, and pins 1 and 2 from row 2. Square 2 uses pin 1 from row 4, pins 1 and 3 ...