Question about DeskJet D1460 InkJet Printer
...pin at head contactor (1 pin only), with tape. Plug it in head carriage. Unplug it. Close to top rigtht with tape too. Plug the head. Unplug head. Remove all the tape cleanly. Plug again. See ink ...
...printer stops printing. I think the print head pins gets stuck between the ribbon thread holes causing this problem..Am in thinking right?? Kindly help.. The mask stops this sort of problem and the ...
...head pin is broken.. you can check your print head by removing it.. just unscrew the screw holding the print head and look at the front portion of the print head..over there are rows of pin.. see if ...
i want to take 9pins dmp printers head pin test how can i get download for it Try this site:- tricks-collections.com/print-head-test-program-for-9-pin-and-24-pin-dot-matrix-printers/-
...head There are 9 pin heads. Here is a link to more detailed info and specs about the printer http://files.support.epson.com/pdf/lx3pii/lx3piipg.pdf I hope i understood your question. Take care
...head of Printer BROTHER M-4318 Printing with gaps I want to know the cost for the new head The problem might be with stuck 'pins' in the head. Pins stuck due to clogged ink. 1) Wait until the ...
...Printer head is moving, but it is not printing, ribbon and head is OK. i change the head and ribbon but problem is same. Thanks, I Try it. but it is still not printing, because printer head pins are ...
...head pin problem Letters are printing, but not fully from top to bottom. Our tech people say it is the "pins" that have dropped out of the printer head. Please advise a quick and inexpensive plan of ...
Question about DFX 8000 Matrix Printer
...head and white cable are ok If one pin of your Epson LX-350 printer is not printing even though you have checked the print head and the white cable, there are a few other things you can try to ...
Question about DFX 8000 Matrix Printer
head pin or the connection between the print head and the main board of your printer. Here are some steps you can try to resolve the issue: Check the print head pin for any damage or debris that could
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions