Questions & Answers for: pilotes

intermittant flame, ignitor function is good, all other functions are as designed,timer ,tumble etc. Hi The pilot light flame would sometimes get very small and keep going out. This was usually ...

One of the top burner pilot lights will not stay Vulcan Hart Model #60L Restaurant Range One of the top burner pilot lights will not stay lit. It is the second front burner from the left. The left ...

gas is on pilot won t light Hello there: The problem you mention is not that clear. The pilot won't light or the pilot lighted but won't stay on is two different problems. If the pilot won't even ...

The pilot on my Procom QL300TYLA will not light. It appears that no propane is getting to the pilot. I tried lighting the pilot and burner with a BBQ lighter but nothing. No propane getting to the ...

pilot wont stay on Thermocouple has failed., replace thermocouple or dirty pilot assembly, not enough heat being genrated to produce the 30 mili volts D.C. current to hold the pilot valve open. Clean ...

thanks, so how do I clean the pilot orifice ? You have to remove the pilot assembly in order to clean the pilot orifice, make sure to shut down the unit before doing this. Unscrew the pilot assembly ...

pilot is out on lft side burners, I open cover to light pilot, when i close cover pilot goes out again you have to send the model number off of the machine,the number you sent 117 stoves popped up and

i have a empire corcho r-115 pilot is real little and shuts off after 5 min. and see flame under pilot You have a leak on the pilot tube under the pilot  hence the small pilot .leak needs to be ...

Sometimes I have a hard time keeping the pilot lit. When I can get the pilot lit, as soon as I turn the stove on from pilot, it goes completely out. When I can get it going, it will work fine for a ...

How do you light your pilot light on an kenmore oven Kenmore maxitrol oven. Oven and stove are not connected To light the pilot light on a Kenmore Maxitrol oven, please follow these steps: Locate the ...