Questions & Answers for: pilot light wont stay lit

pilot light has gone out. get a long stick match, a flashlight remove lower inspection cover, find thermocouple and pilot light will be next to it,turn gas valve to pilot light and hold down,stick the

pilot light on my furnace to stay lit. take out the pilot assembly. there is a small burner and an orfice. the orfice does get clogged if it has not been operated for awhile. you can clean it out with

Light pilot on Royal deep fryer. Pilot will not stay lit. Second fryer has larger pilot have no trouble keeping it lit. How can I adjust the pilot so that it will stay lit? there is a small adjustment

...pilot light wont stay lit i have a propane furnace for a heater and my pilot light wont stay lit i replaced the thermo coupling Hi try cleaning the pilot light out make sure the thermo couple is in ...

...Pilot Light wont M# 640HORT4 s# H07A090378---MY Pilot Light wont stay lit. I light the Pilot Light turn it on it gets water hot then the pilot light go's out. need a new one.(pilot

...pilot light look inside on panel directions if not turn to pilot setting hold down button light under where small silver line goes under while holding down button when lit keep holding for about a ...

...its the thermocouple next to the pilot light thats bad and cant keep the pilot on Try holding the button down for a longer time. Thermocouples are slow at heating up to maximum. Hope this

Pilot light on Tempstar furnace wont stay lit. replaced thermo-couple and it still wont stay lit. what next??? Do you have a good pilot flame? Is it wrapping around the thermocouple good? You may need

...wont stay lit pilot lights but wont stay lit Sounds like the thermocouple is shot You could always try cleaning the tube. It's important to keep that thing free from carbon so that the flame can stay ...

...Pilot light wont stay lit snd heater flame wont stay lit. Are you holding down the pilot light button long enough for the heat sensor probe to get hot and turn on the gas valve? It takes up to 3 ...