Questions & Answers for: pfister faucets handle removal

...Pfister web site recommends removing the handle (unscrew the dome cap, then remove the phillips screw to get the handle off) then tightening the retaining ring (I used channel lock pliers on largest ...

Pfister Main water line seems to have adequate pressure on nearby sinks and with the kitchen sink spray hose. Faucet has a hot and cold tap and both have low pressure. Filter screen on faucet is clean

...pfister two knob kitchen faucet and the cold faucet turns off backwards. How do I make it shut off in the right direction ? Thanks ! you will have to remove the faucets and turn the base around, that ...

...Pfister Marielle kitchen faucet. The valve body leaks when handle is in off position. There is an o-ring around the valve body inside the outer shell. This needs replacing -- sometimes you can match ...

...Pfister 042-VGCC faucets and the cold water side comes out really slow. All other fuacets work great and hot water is fine. I disconnected at the valve under the sinks and there is plenty of water ...

dripping faucet price pfister kitchen Very nice kitchen faucet. I like Price Pfister's products. To repair it you will need a phillips screwdriver to remove the handles and crescent wrench to remove ...

...Pfister at 1-800-PFAUCET and ask them to send you a new hot and cold stem for free. These faucets are easy to repair. Here is the parts breakdown for your faucet. Turn the water supply of to the ...

...handle setscrew. Use a 2.5mm hex wrench to loosen, not remove, the setscrew. turn the screw counter clockwise to loosen, and then the handel should just pull straight up and off the faucet. Here is a ...

...pfister single handle shower/bath control cartridge needs to be replaced. I've removed the retaining nut, but I've been unable to remove the retaining ring that holds the cartridge. My device is ...

...pfister shower cold water faucet handle broke off. The stem is stuck so I can't replace the faucet handle. How do I remove this stuck portion of the old handle? the model is needed for a step by step ...