Questions & Answers for: pdp42v18ha y sus board

...pdp42v18ha-ysus-6871qyh053b-repair-serviceHope this helps! Replace the alu-case electroltics in the 15V-line of the Y-sus, they are connected to the inputs of the 15V regulators. I've repaired a lot ...

sus board or Z-sus board. If this unit is having problem for the first time I would recommend to Change the Service Kit Part number is TV-3940-01. This kit contains E-prom,Y-sus board, Z-sus board and

...sus board, i had a local tv repair shop diagnos that much for me. although, he couldn't fix it i did some research and found a company in california, itritek.com, who could. you send him the y-sus ...

however the Z-sus and Logic board may cause this complaint. A failure in the Y or Z sus boards can cause the other sus board to also fail. I have also found the Y drivers bad after replacing the Y sus

sus board blown? Hi, me again - further to my previous question, checked y sus board compared to z sus board - z sus "fizzes" (50 Hz) under the big heatsink, but the y sus board is silent. 5V, 60V and

...sus board replaced year later same pop of death My aunt had the pop of death last year, tech look and replaced the X-SUS BOARD. Worked until now, how do I test the x-sus and what else should I test? ...

...SUS BOARD is for picture in tv.if the picture is not coming or not proper the Y-SUS board needs replacing .but if the picture is blurry or with linings reparing helps.but in your case the tv does not ...

...SUS board, the one situated on the right side viewed from the rear. This board develops a high voltage during operation that might be the source of the popping sound. It is also responsible in ...

...picture is still there. I tried to adjust brightness and contrast via remote control but it doesn't select the functions. Its probabaly one of the three boards, X-SUS board,Y-SUS board, Z-SUS

...Sus board no help. Changed Logic controller and got picture. But the picture now has splotchy color especially blues and shadow have a yellow tinge to them. tried adjusting the pots but that didn't ...