Questions & Answers for: pcv hose

...pcv valve hose connected Changed the head gasket on the engine. When all back together the engine would not start unless the hose to the pcv valve was pulled. Engine starts and idles high, but when ...

PCV HOSE ON MY FORD ESCAPE XLT V6 YEAR 2003 '01 Escape V-6 PCV valve is harder to do.  I read other articles on how to do it,  many good, some bad.  I removed the "appearance cover"

PCV Valve is in the end of 1/2" or so size hose inserted into a rubber grommet in the top of one of the valve covers. I believe it's on the passenger side closest to the firewall. If you have the

...pcv vacuum hose ? I beleive it's simply called the PCV hose. If you go to the auto parts store, the hose may come pre-formed or they will be able to supply you with the correct diameter hose. I would ...

...from pcv valve and 2004 Mazda MPV vacuum line from pcv valve and intake is closed flat. New mass air flow and hoses and pcv valve. You have the wrong type hose on the pcv valvle. It isn't vacuum

...NEW PCV IN VACUUM HOSE THEN INSTALL NEW PCV IN VALVE COVER. the picture of the PCV valve location was useful, but the way to pull it up is not easy. I broke mine. just to let you know how hard it

one of the valve covers it will have a hose attached that runs the air cleaner or throttle body. simply remove this hose, remove PCV from valve cover, install new PCV re-attach hose and your done 

...on hoses apart ! Pull hose off larger end of PCV ,start engine , place finger over PCV , if suction is good of PCV no need to replace pcv (unless pcv is oil soaked.). Reconnect hoses . Good ...

...FSM? open hood touch valve cover. with finger, now see 2 hoses. on VC. about 1inch OD. one is PCV fresh air. and one is PCV valve hose. that hose. the one with the PCV check valve device on the

valves 1997 2.4 If the PCV hose .is probably pluged and or rotted out . You will need the PCV pre heater hose . And the May be one other hose also. Last time I checked the pre heater hose was obsolete