Questions & Answers for: Panasonic VIERA pcm audio

...with my 61" Panasonic LCD HDTV. Reset was under picture settings. Select the sound menu and select PCM for SPDIF ...

audio settings. can't get pointer on the remote to go to default audio settings. Right now audio is very poor. Sometimes bad audio can be caused by putting your tv in surround mode. By putting ...

...pcm to dolby digital or vice versa can get your audio back up on these channels. Remember some stations are broadcasting in digital pcm and or dolby digital. I would leave tv on pcm. If that doesnt ...

got a svga/hdmi cord and hooked up for my panasonic viera plasma to my computer but nothing shows on my component 2. also wondering if i'll need a cord for audio - i have double red/white/yellow cords

HOW TOO CONNECT AUDIO OUT? hi, u can connect the digital audio output (optical) to ur av receiver or any amplifier wich have a digital audio input(optica). ok

Want to turn off audio description off on my Panasonic Viera. Handbook says go to menu then sound but I can find nothing there. iv got a panisonic i dont know if its the same but i click on the ...

...if it is set to DTS it won't work on PCM audio. if it is set to auto Digital it should work on any standard. check the PCM or DTS options in both the TV, and receiver if those settings are

find the best audio setting for panasonic tv There isn't a best audio setting. We recommend you simply use the TV's audio menu to manipulate the sound until you find your preferred values.

no audio on dynex- dx-lcd 26-09 If picture is OK, audio should be there. If not, check its speaker/s first. If found OK, check and replace damaged component/s at its audio output section circuit, or ...

digital output through DAC static using a DAC converter only get static Set the digital output in the TV menu to PCM instead of Dolby Digital. Your DAC probably can't handle DD.