Questions & Answers for: paper pickup press

...paper pickup assembly, or somehow the timing has been changed. The gears in many paper pickup assemblies (or ASF for Auto Sheet Feeder) have to be timed correctly. If someone has pulled a piece of ...

...Paper Pickup I am getting an error message on the HP 3390 printer stating "** Paper Pickup". The paper tray is full and it keeps doing this in the middle of longer print jobs. When i press "enter" it ...

...paper pickup press Hi I had a paper jam. when I removed the paper it says No Paper pickup press enter. When i press nothing happens. I have done every thing i can think of puting paper back in remove ...

...paper, and vibrating the pickup "wheel" so it sounds like a mini jackhammer. I you reach in the tray area and manually push the pickup "wheel" around the extra little notch by hand, the paper goes ...

have followed the instructions in the user guide as written for loading paper. error message 'out of paper, load and press ok' thx please try to clean rubber rollers that pickup the paper but didn't..

...paper pickup, press enter Suspect worn and or dirty paper pickup roller. To check the roller simply open top cover and remove toner cartridge. Roller is D shaped and can easily be removed by gently ...

the machine down until you get to the springs that lifts the papertray. Stretch the springs a bit. This will cause the paper to be pressed against the pickup roller. Re-assemble the machine and try it

...paper tray is Q5931A HP Support document HP LaserJet P2015 Series Printer - Replace the pickup roller (tray 1) Unplug the power cord from the printer, and allow the printer to cool. Press the ...

...paper pickup, Press check 1. Push the paper far inside / use the priority tray. 2. Check for deterioration of the rubber on the main pickup roller (Replace if needed). 3. Ensure that the main paper ...

...paper detect sensor arm and pull down on pickup roller assembly it should be springy not stiff. once it springs again, put paper detect sensor lever back on, on the right side of that lever gets ...