Questions & Answers for: Epson where is the paper output tray

...Paper A3+ Ensure the output tray is in the correct position as if the tray is too low and the paper "falls" down into the tray the weight of the paper could pull the last few millimeters of paper out ...

...output tray extension. 4. Place your paper in the printer and slide it against the right side of the sheet feeder. Check the following as you load paper: * Always load the short edge first, even for ...

...paper, move the output tray to the lower position and printing will start Here is the problem... Because the printer has more then one feed, your program(i.e. MS word) is selecting the CD tray by ...

...output tray. 3. Take off the front paper tray if the sheet jammed while still in the front area of the printer. If here, you should be able to see most of the paper. 4. Pull the sheet with both hands ...

paper support. 3. Push in the output tray extensions, but leave the tray open. 4. Lift the output tray. Place one hand on the top of the printer, and pull up on the output tray until it stops. Lay the

...output tray. 3. Step 3 Take off the front paper tray if the sheet got stuck while it was still in the front area of the printer. If the sheet jammed here, you should be able to see most of the paper. ...

...output tray. Take off the front paper tray. If the sheet jammed around here, you should be able to see most of the paper. Pull on the sheet with both hands and steady pressure. Don't tug too quickly. ...

...paper output slot or from the transport unit, or the jammed paper remains inside the machine, remove the paper following the procedure below. 1. Turn off the machine, and unplug the power cord of the ...

...pull out the stuck paper from below the front cover.
Some other papers pull out from the output tray.
Tear Paper remove by cartridge move forth or back direction.
Now Restart the HP

...paper from the output tray. Check the rollers in the output tray for jammed paper. Use a flashlight to see the rollers in the printer. Figure : Use a flashlight Gently remove any jammed paper or bits ...