Questions & Answers for: Brother HL paper feed

Question about HL 5140 Laser Printer

1 Answer

feed the paper correctly. Every piece is feeding crooked and causing a paper jam. I had this same problem. I finally noticied that the problem occurred consistently on the right side of the paper feed

Ad

Question about HL-2040 Laser Printer

1 Answer

...problem My printer either wads up paper as it feeds thru, or will feed extra sheets of paper. Any clue why this happens? I have tried several different brands of bond paper. Clean the drum ...

Ad

Question about HL 5250DN Laser Printer

1 Answer

...out backwards? I find that paper scraps in the initial feed path can be impossible to see, so I have a piece of laminated paper to push through the feed path. It often finds bits I couldn't

Question about HL-5240 Laser Printer

4 Answers

feed paper from tray Printer was working fine. It ran out of paper. I put new paper in the tray. Now when it goes to print it makes a cry as it tries to get paper, fails, cries again, fails, etc until

Question about HL 1440 Laser Printer

1 Answer

...feed - load paper tray. Its a brand new printer (Brother HL-4040CDN) and the paper tray is full The printer has an "alternate" feed, i.e., for envelopes and/or for special paper. Open the door to ...

Question about HL-2040 Laser Printer

1 Answer

...paper feed either on the front or rear of the printer.   6-Put a few sheets of legal size paper into the paper feed. The paper should be placed as close to the rubber spindles as possible. These ...

Question about HL-2040 Laser Printer

1 Answer

...paper won't feed up after you press print, that mean paper is jam... but for this model, you have to make sure the drum unit is clean as dirty drum unit will cause paper not able to feed,.. suggest ...

Question about HL-5240 Laser Printer

1 Answer

feed from paper tray, only manual feed. It makes a clicking noise. Toner is newer, definitely not empty. I've tried all the tricks of removing some paper, using different paper, turning the paper over

Question about HL-2070N Laser Printer

1 Answer

...paper to feed from the tray instead of the manual 85% of paper feed problems are caused by worn. The rubber treads in the rollers wears down, making them smooth, so they won't pick up the paper. ...

Question about HL 2140 Laser Printer

1 Answer

...paper feed and output method when you want to print on thick paper, labels or envelopes. Open the back cover Open the manual feed slot cover. Using both hands, slide the manual feed slot paper guides ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...