Questions & Answers for: Lexmark paper feed

Feed the paper manually into the printer: Place a sheet of plain A4 paper in the paper feed tray. Move the paper support on the left-hand side to the left end of the paper. Press the paper feed button

Paper feed rolls is rolling over the paper...how to get access to those rolls My paper feed rolls are not clean anymore and would like to clean with 'disolvent'.....but I have no access to them. How ...

feed paper through while printing When try to copy something. The scanner works but the printer always jams or doesn't feed the paper through. I push the paper feed button and the paper comes through,

Paper feed Paper not feeding correctly; wadding up. The most common factor here is moisture in the paper if it has sat too long. Try just line feeds to see if the transport is at fault or the paper is

...FEED PAPER AND PRINTER HEAD MOVES AS PRINTING BUT WILL NOT FEED PAPER WHILE PRINTING? ARE THERE 2 FEEDERS IN THIS PRINTER? HOW TO FIX? transfer roller that starts the paper and feed that feed the ...

...paper feed area) causing the paper to get crooked. It can also be caused by improperly adjusted paper guide or the paper is not in good condition. Paper Feed Rollers Are Rolling But the Paper Is Not ...

feed. I've had a look inside and cannot detect a paper jam anywhere, yet it still feeds the paper in incorrectly. Any advice would be gratefully received. This article in the Lexmark website on How to

...paper feed mechanism down inside the printer where it is not easily seen. If there is nothing obvious, unplug the printer and remove the paper. Open the front cover and look above the steel rod. You ...

...paper feed mechanism down inside the printer where it is not easily seen. If there is nothing obvious, unplug the printer and remove the paper. Open the front cover and look above the steel rod. You ...

...paper feed mechanism down inside the printer where it is not easily seen. If there is nothing obvious, unplug the printer and remove the paper. Open the front cover and look above the steel rod. You ...