Questions & Answers for: Brother paper feed

...me to add paper. There is nothing stuck. ????? Pull out the paper tray and push the paper feed roller towards the machine. Try to turnaround the paper feed roller by hand. Reinsert the paper

Paper feed occasionally gets stuck 1/3 way through. A few days after I replaced the drum, the paper gets stuck 1/3 of the way while passing through the paper feed. I have to remove the paper jam and ...

...Paper feed. You will need to ope the upper face portion by pulling it, and then look for papers/ dirt / pins there, you can either clean it by blowing air or use a blower, or if you can see the ...

paper feed (brother MCF-440CN) paper is in printer,just the way it should be ,but every time we try to print it goes through all the sounds like its printing,but a message appears (No Paper Feed) ! we

feed. Paper guide too tight so that paper can't lift to the feed roller also a possibility. Sensor above paper stack out of position.. many possibilities. Does it say "No Paper in Tray 1" or "No Paper

Paper Feed Tray will not feed paper. There is a Paper Feed Tray will not feed paper. There is a grinding sound like the gears do not want to connect to feed the paper...can this be self repaired? goes

...paper feed roller. Let go of the paper when you feel the machine feed the paper in a short distance. Note: When you put paper in the manual feed slot, please remember the following: ■ The ...

...paper feed and output method when you want to print on thick paper, labels or envelopes. Open the back cover Open the manual feed slot cover. Using both hands, slide the manual feed slot paper guides ...

feed paper after a jam. unjammed paper. reset. still won't feed. help! BROTHER MFC 230 will not feed paper after a jam. unjammed paper. reset. still won't feed. help! Had a similar problem

...paper and feed it through. I have changed the advanced setting of the printer to glossy paper and I've even changed the advanced setting to thick paper and nothing seems to work. I've also tried ...