...tool to adjust the high low screws,on the poulan carb. A standard screwdriver will not do. Model #P4018 WTL I just finished looking at mine and I think they made it that way so back yard mechanics ...
Question about Wild Thing 18" 40cc Gas Chainsaw - P4018WT
Jammed pull cord on Poulan P4018 chainsaw! I have a fairly new Poulan P4018 chainsaw that I took out to cut a small tree. When I pulled the cord to start it the pull cord did not retract. So I looked ...
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
need to replace spark plug On page 16 of the link, you will find the disassembly, installation instructions of how to replace the spark plug, as well as the size. I hope this helps. ...
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
Poulan P4018 need to reassemble brake/clutch but how? Thanks This machine has an inboard brake, there are no parts available for this brake, it is not easy to re assemble the spring, and load the ...
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
I have a Poulan 4018 that is not getting any fire to the spark plug. It has had hardly any use. Do I need to replace the coil? I installed a new plug with no results.Please advise. Steve Before you go
HOW DO YOUREMOVE THE SPROCKET The P4018 has an out board sprocket, so to remove you need to remove the side cover nuts and take away the cover, the bar and the chain, there is then an e clip on the ...
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
poulan 4018 pp4018 proper fuel mixture?
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
how to adjust the fuel mixture On the carby there is a H screw and a L screw just undo the h one a fraction ,until the revs pick up.
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
carb adjustment settings I rebuilt the carb on my poulan p4018 I need to know how many turns out from seat to start adjustments My humble opinion... I have rebuilt many small engines and carbs. You ...
Question about P4018 18Inch 40cc 2Cycle Gas Powered Easy Start Chain Saw With Case
what is the spark plug gap of my poulan gas chain saw model p4018 40cc/18 The plug gap should be 0.5mm It would be 0.25 gap to your spark plug Hello. Set it to .030 and your be fine
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions