OPC/DL light flashing Same problem of black screen and green lights flashing at power and OPC Help.... WHEN FLAT SCREEN SHARP LCD IS ON .. BLIKNING ON BOTTOM OF SCREEN SAYS OPC Try to use an advice ...
...OPC belt to light. 7. Remove the two shipping pins from the new OPC belt cartridge. 8. Remove the protective sheet that covers the photosensitive belt. 9. Slide the new OPC belt cartridge downward ...
Question about 2545DP Black and White Copier
...light. Needs service yes, it need to be replaced the opc drum, opc drum cleaning blade and the developer, or just the opc drum and cleaning blade for the opc drum. Best turn out is to be done a ...
Question about Aquos LC-46D62U 46 in. LCD HDTV
...opc light and power light sharp aquos lc-46d65u no picture no sound opc light and power light flash. This is very common in sharp tvs.U turn it on.U get power on light stable right?U hear a click,one ...
Question about Aquos LC-46D62U 46 in. LCD HDTV
light and OPC light flasing but nothing works the power light and the opc lights are flasing but TV doesn't work First turn on power light stable at all?Power and OPC lights well flash,but push on/off
Question about Aquos LC-42D62U 42 in. LCD HDTV
OPC LIGHT IS BLINKING This problems very common on Sharp Tv.Do ur tv LED power light turn on solid first.Few mins,than LED,OPC flahes.Power LED,OPC flashes,push power button again,do this at leat 5 or
...opc light mean? when turned on, the power light and opc lights flash instead of the tv coming on. will never buy another sharp product. have had less than 2 years! Flashing power and OPC (OPC is for ...
Question about Aquos LC-37GD6U 37 in. LCD HDTV
...OPC light). I) If non of the lights come on then this is a AC Power failure (There is a loose connection or you need to check the Power/Inverter unit or the Main unit) II) If the power light is ...
OPC LED light will flashes require push power again wait again Power and OPC will flashes two or three time push power button and wait.Must do this two or three time before the backlight will light up
Question about Aquos LC-46D62U 46 in. LCD HDTV
light up the Tuner signal board kick in and work.Have to press the remote power button and wait for the POWER and OPC LEDS to stop blinking and the Tuner signal board to kick in.But like POWER and OPC
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions