Questions & Answers for: Chevrolet Venture oil spraying

...they don't lay down. Solved!! I fix it on two montana . i Sit an afternoon to realise olly drop of oil is needed!! So look at this: Open the hoot and locate the disk on the top of the wiper motor . ...

...but because of so much heating and cooling those bolts get really tight.Spray alot of penetrating oil (WD-40) on and around the bolts.You may even want to tap the wrench on the bolts in the

spraying the latch mechanism with WD-40 or similar light oil and operating the release cable a number of times. Check the condition of the release cable if nothing happens. The latch itself may have a

...oil, replaced the fuel filter on the frame, also found a vaccume hose that was questionable changed it. Ive tried replacing the mass air senson[no change] the pressure sensor by the distributer. {the ...

...which is under a cover if you look left rear as you open the hood.Spray the plates with a light oil (wd40 etc) and tap them lightly as you cycle the wipers on and off.They should park now.Lube ...

...bolt? spray it down with penetrating oil then put a socket on it and twist it back and forth continue spraying penetrating oil and working it back and forth till it comes out .let me know how it ...

code 0172 system too rich P0172 - System Too Rich (Bank 1) Basically this means that an oxygen sensor in bank 1 detected a rich condition (too little oxygen in the exhaust). On V6/V8/V10 engines, Bank