Questions & Answers for: Harley Davidson FLHT Electra Glide Standard oil pump

...oil pump? The pump was just rebuilt with the motor. The light didn't come on before the rebuild. the only way to check the oil pressure switch is to remove it and replace it, or test with a analog ...

oil pump. When you look at the top of the oil pump, the check ball is under the innermost threaded plug, the low one, not the high one. You will have to drain the oil tank before you remove this ball.

...and seams to get hot. I think maybe oil pump? Shovel head lifters tend to wear out. Check your adjustment first. Shovels also run on the warm side. Does it idle good? If not, check for intake

Im replacing my oil tank on my 1972 harley. do i have to remove the inner primary or can i remove rear wheel and fender to remove and replace? Neither. You oil tank will come out without removing any ...

i have a 1984 FLHS Shovel. It is pumping oil out of the crankcase breather tube. you either have too much oil in there or the engine needs rebuilding as the rings/bore will need sorting out.

oil pump and fill the crankcase with oil. Once the crankcase gets filled, the oil seeps into the primary through the Timken bearings on the left side of the engine. If the primary is still in it's

...then a single line into a mini filter under frame. 3. Purchase Arlen Ness Super Sucker. 4. Replace umbrella valves and realign oil pump 5. Upgrade oil pump and cam plate Good luck and have nice

...oil pump and still how low to no pressure, i would like to check the oil pressure relief valve how can that be done Hi Chris, try bleeding the system by unscrewing the oil pressure switch enough to ...

...oil pump, for more information on your question please visit the websites below and good luck ...

oil pump itself. Hi, Paul "OUCH" I feel your pain I too own a 2003 FLHTCUI Anniversary Edition I only have 25,000 miles on it but upgraded a long time ago to the S&S 510 gear drive kit eliminating