...oil pump after every oil change?otherwise no oil pressure..79 ironhead... You shouldn't be having to prime the oil pump with every oil change. If you're running the original oil tank in it's original ...
...oil pump underneath the right side cover just below the timer cavity. You'll see the oil pressure sending unit. Take the wire off and take the unit out. Take the spark plugs out of the engine. Spin ...
Question about 2001 XL Sportster 883 Hugger
...oil pump is not working. If the oil is coming out of the intake that bad, the engine is full of oil. The Harley oil system is a "dry sump" type of system in that the oil is not carried in the ...
...oil pump and starts to settle in the engine. When you check the oil tank, it's low. So, you add a quart. When you start the engine or turn it with the starter, the oil pump pumps the oil out of the ...
...oil pump. The oil comes out of the other fitting on the pump and goes through the oil filter. It goes to the outer edge of the filter. The oil comes out of the center of the filter and goes back to ...
oil pump and fill the crankcase with oil. Once the crankcase gets filled, the oil seeps into the primary through the Timken bearings on the left side of the engine. If the primary is still in it's
...oil pump diagram please 1998 sportster has great oil pressure at point of cooler hook up however the head seems dry and noisy like no oil is getting to the head. Here is a site that will show an ...
...oil pump. On the lower backside of the oil tank is the oil drain hose. If you're unsure which fitting on your oil pump is the inlet and which is the outlet, squirt a bit of oil into each fitting ...
...oil pump everything is great except after about 20 mins of riding oil start coming out of gasket all around cam cover and mag assembly dont know what would cause this my tel 7725014577 derek There ae ...
Question about 1979 XLH 1000 Sportster
...pump oil when gas is in oil? If the oil pump is somewhat worn, and the oil is really thinned out with gas, yes there is a possibility it will not pump. I had a 1976 XLCH, that I had to do the top end ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions