Questions & Answers for: oil injection Cars & Trucks

Question about 2007 F-250 Super Duty Lariat

2 Answers

...oil pump, ICP sensor (injection control pressure sensor), ICR (injection control pressure regulator), or bad HEUI injectors, or oil lines -Leak in the high pressure oil system (unlikely because you ...

Ad

Question about 2001 F350 Super Duty SuperCab

2 Answers

...oil pumps, low lube pressure and high injection control pressure (ICP) the injection system is hydraulic controls electric actuated fuel injection, if when you crank the engine over and the oil ...

Ad

...injection oil pressure)must reach 500psi in order to start engine may have failled o -ring or stc fitting in injection side or possible ipr failure valve cover right side front icp sensor removed ...

...an oil change 350 5.7 L V8 (Throttle body Injection) HELP make sure vacuum port for PCV is pulling vacuum. They tend to get clogged with carbon when oil changes are over due , oil level is ...

oil in the air filter housing, check your pcv system (Positive Crankcase Ventilation). Your pcv valve may be plugged or not working. And just so you know, it is not a carburetor. It is a throttle body

injection pump. 6. Oil Supply Problem - Oil transfer pump doesn't supply oil or the oil supply is brokenly. Solution: Check whether the oil inlet pipe is leaked or not and the filter screen on the oil

...injection pump. 6.Oil Supply Problem- Oil transfer pump doesn't supply oil or the oil supply is brokenly. Solution: Check whether the oil inlet pipe is leaked or not and the filter screen on the oil ...

...bay rear tail pipe broken exhaust parts. if injection fails to end key off, that is very very serious problem called RUN-AWAY where the engine eats its own oil pan oil. bad piston rings top

...oil, can anyone confirm if the fuel injection pump is lubricated by the engine oil, I thought it was but I can't see any oil lines on the fuel pump. The Caterpillar 3412 engine is a large industrial ...

oil level can cause issues with the injection control pressure system. Inspect the oil filter and replace it if necessary. A clogged or dirty oil filter can restrict oil flow and cause pressure issues

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...