Questions & Answers for: Robinair oil injection

have 34700z refrigerant pressure into oil injection bottle why? This is a normal function of the machin,so don't worry!

under vacuum down machine started pulling oil front injection bottle You need to Change ''Oil inject" solenoin from small manifold assy. Note:Green dot OR blue label denotes are oil injectoct solenoid

...oil injection then you may need to check oil injection CHECK VALVE or oil injection SOLENOID ( Both located under Hidg side panel mountin valve). NOTE: UV Dye is not a problem for oil injection! I ...

MY MACHINE WOULD NOT "INJECT OIL" INTO CUSTOMERS SYSTEM. OIL CANISTER IS 3/4 FULL WITH UNIVERSAL OIL/UV DYE. ALL PROCEDURES WERE FOLLOWED EXACTLY THE SAME AS ANY OTHER VEHICLE. FIRST TIME THIS HAS ...

347002k. wants to inject oil in charge mode? is it the check valve? You have to do Just following # Check oil drain solenoid for any debris or damage inside the solenoid flunger. Replace/rebuild as ...

...oil injection button (old series machine) press 8787 on keypad. However you can try as following: To access the change Defaults menu press 5454 (If keypad has oil injection button old series machine ...

CANT PUMP NEW OIL IN First make sure that you are in a 28-30 inch vacuum. then if you are your oil inject solenoid is clogged up. when you take the covers off there is a small block with 5 solenoids ...

34788 will not inject oil You have to clean oil injector solenoid or replace the new one. To find oil injector solenoid (S3) in the manifold assy. see the attached picture marked with green arrow. ...

...not inject oil You need to Rebuild/Replace oil injector solenoid, Located on "Inlet manifold block". Check attach picture to find location of oil injection solenoid. Hope this will help you. ...

Robinair 34988 won't inject oil? We are injecting it on the high side, also we have 7 oz. of oil in the container but when it goes to inject it doesn't it doesn't even seem to try and when