Questions & Answers for: kawasaki KX 250 F oil breather

Question about 2004 KX 250 F

1 Answer

Oil

oil how many ml of engine oil is required in the sump I do not know in ML, but if you look on the right or left side of engine you should see a site window. When you put the oil in what you are ...

Ad

Question about 2004 KX 250 F

1 Answer

i need the right ratio for my bike!!! KX 250 2003 WHAT IS THE RATIO well that depends on what oil your using but i run all of my bikes 30:1 which is 3 oz.oil per gallon of gas

Ad

oil out breather should I be concerned? Just baught my 2006 KX250F and its blowing oil out the breather, I noticed the oil level is a bit high, and by a bit I mean the sight glass was completely full.

My 2006 KX250F is mixing the oil and water. I can see through the oil inspection glass that the oil is milky. What could possible causes be? could be one of two things. possible bad head gasket or ...

...sits idle - generally stalls if no revs when starting). Coolant leaks from overflow. Have checked oil and it seems used but doesnt really look creamy (but is definately not new oil by the look of

Question about 2004 KX 250 F

1 Answer

What kind of engine oil should i use for my 2004 kx 250? Most Cycle engines will operate very well with a 20 wght viscosity oil in most small engines.

my 2004 kx 250f is leaking oil from where the shift lever and gear box meet, how can this be fixed and why might it be leaking? hi, is this from around the shaft? if so a seal is fitted to this, it is

Question about 2005 KX 250 F

1 Answer

who often do i change the oil on a kx250 If you race this bike then I would suggest at the end of every full race meet dump the oil and filter as apart of the clean down to put away for next race day ...

I bought 2006 kx250f without starting it when I put coolant in it leaks out my oil filter probably not cooing out the oil filter, possibly coming out the water pump telltale hole, to let you know it ...

87 bayou has oil like fluid coming out of the pull start and push start won't crank the engine. the shaft seal is bad behind the pull start and leaking oil into your stater which is why you arent ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...