Questions & Answers for: how to take off a chuck

...chuck off and the black plastic cover for the chuck, but can't figure out how to get anything else off to try to get that disc back in the right place. Place tool lightly in vice, place any allen ...

the regular lefty loosey configuration. It may be stubborn. If this is the case, You may have to cut the collar off the chuck and use a pipe wrench. Or bring it to a professional to get it changed out

...chuck off broke tool off inside chuck The screw that holds the chuck on, is in the bottom of the chuck itself. If there is something jammed in the chuck, it must be removed in another manor. If the ...

off the chuck on my dewalt hand drill? I have unscrewed the screw in side the chuck, but the chuck doesn't come off! You have to put the longest allen wrench possible into the chuck and tighten it up.

...off behind the chuck Take digital photos when taking the front metal gear box off the drill. Next carefully remove the two plastic halves of the drill if needed to gain access to the shaft that holds ...

...right off, with a little effort. Best regards, --W/D-- Try opening the chuck all the way, look inside the chuck, you should see a bolt head or a nut; remove which ever it is and chuck should pull

...chuck off. I see a slot in the chuck that looks like you my put a screwdriver in but with the gear box out do not know how to get the chuck off. The chuck has a left hand threaded screw inside. Turn ...

...chuck off. (Chucks have normal threads, the retaining screw is reversed threads.)1. Check for a flat spot on the spindle behind the chuck. If there is one you can clamp down the chuck in a vice and ...

chuck off of my DeWalt DW 117 1/2" VSR Drill Serial #1229? How do I replace the chuck on my DeWalt DW117 1/2" Drill serial#1129 Open the chuck jaws and look down inside the chuck. You will see a screw

...chuck will spin off standard thread (Left hand loosen) Most of the time I chuck a 1/2" allen wrench into the chuck, mount the drill in a vise, and strike the wrench with a hammer to get the chuck ...