Questions & Answers for: obd not ready testing

Question about 1998 XK8

2 Answers

...OBD II Monitor Testing not complete You may be experiencing ECM computer problems. Have it diagnosed by a certified ASE professional. P1000 OBD Systems Readiness Test Not Complete Scan without ...

Ad

Question about 1999 Voyager

1 Answer

OBD II test. For initial and subsequent tests, if a dashboard light is on when the vehicle is presented at the E-Check station, the vehicle will fail the test. How can the vehicle status be made ready

Ad

...OBD system had to be ready for reinspection. It the send the owner to see the vehicle owners manual for info. on "OBD/Rediness Driving Procedure. What does this mean? it means an unit either the ...

...obd system ready lights, which will cause the same outcome. OBD test check for faults and these are "p" series codes once the light has come on it stores them and a freeze frame when the faults has ...

Question about 2006 Vue

1 Answer

...engine shaken and do not can accelerate it because do not work. Your vehicle is equipped with an OBD II computer AND a link to connect OBD II computer to a Smog Check Analyzer or Data Scan Tool ...

...japan. does anyone know how to change the language settings aswell Your vehicle is equipped with an OBD II computer AND a link to connect OBD II computer to a Smog Check Analyzer or Data Scan Tool ...

...ready" reading during emissions testing Hi Paul@ FIREFOX, The most common cause is the engine is not upto working temp.failing this you will need to use an O.B.D 2 meter to pin point fault this will ...

ready for testing? For OBD 2 there are thing's the cars computer check's for emissions , there called monitors . When these monitors run an set the vehicle will be ready to pass an emission test . OBD

...ready for an OBD test. If this happens, you will need to drive your vehicle further to allow these monitors to finish testing the equipment. The amount and type of driving needed varies according to ...

...ready" condition. As each non-continuous OBD monitor completes a full diagnostic check, the I/M readiness bit associated with that monitor is set to a "ready" condition. This may take 1 or 2 drive ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...