...OBD connector in my Subaru legacy 2000 Left side of dash lower cover, by your left knee. Just above hood release, there is a cover that flips upward to access your OBD connector. Hope this helps and ...
...connector and count the blinking lights. (Google Subaru OBD-1 codes). Now as for your problem. Most common cause is the MAF (mass air flow sensor). The square box on the air intake. Try tapping it ...
OBD (On Board Diagnostics), didn't start to become a legal requirement until 1996 but some companies were fitting them earlier than that. First check your steering column for the green style connector
...connector (2) Indicator may appear if there is a particular sensor fails. Try resetting it using the following technique. Sometimes the problem could be solved. Advantage is you could use this ...
..."select monitor" scanner for OBD-1 cars. You also have to know which connector is the OBD-1 connector, it's among many connectors that are up under the drivers side dash . I hope this info
Question about 1990 Legacy
connector starts to melt sometimes due to bad connection of the pins inside. It could be any number of things, I would go to your local parts store to see if they can check for codes. It might have to
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions