Questions & Answers for: not switching on Vacuums

wind tunnel by Hoover, vacuum will not turn off by using switch on upright handle. do not see a way to get to switch. modle no. U5458-900 follow the cord and look for screws inside the bag compartment

Ad

Question about Ultimate G Bagged Upright Vacuum

1 Answer

vacuum does not run at all I have Kirby ulimate G and have disassembled the unit to the point of taking the motor out and the switch off of motor. I can not get any continuity on switch even if I ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Hoover Windtunnel On/Off switch will not turn Off...Switch seems to work O.K. when pressed directly but not with handle switch...It will turn on but not off..Cam seems to be intact on switch actuator.

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

1 Answer

power switch will not engage. If you hold down thepower switch will not engage. If you hold down the switch the vacuum operates normally, but the on-switch will not lock into place. Possibly the micro

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...contacts of the switch IF the cleaner was able to get into the switch. If you try this and it does not work, the next step I would take would be to disassemble the unit and get at the switch to see ...

Question about DC16 Root 6 Bagless Handheld Cyclonic Vacuum

1 Answer

dyson dc30 switch suddenly not working properly Motor is cutting out when power switch is depressed. Toggling the switch makes it work, but you have to hold switch in very tightly, but it still keeps ...

When the button on the power-head is depressed the power comes on but the button switch would not stay on I dissemble power head and depressed switch by hand , switch stay on What causes switch not to

Can anyone please help, my Miele vacuum cleaner will not switch on anymore. My Miele S4211 would not switch on so I changed the power switch. The new power switch was working perfectly when I tested ...

Question about ET-1 Powerhead White

2 Answers

motor does not shut off When you push the the power button my vacuum does not shut off. The two switches that control hard floor and carpet setting work. You can change the switch. Faulty switch ...

Question about ET-1 Powerhead White

1 Answer

Why will Power switch will not stay on? Shark S3325 The unit works now that it's clean. Put it all back together & now power switch will not stay on. If I hold the power switch down, it heats up. Good

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...