Questions & Answers for: Geo Tracker not switching on

Back up Light Not Working My backup lights are not working. I have replaced the bulbs, checked the wires and replaced the reverse switch. I have not checked the manual transmission fluid level. Would ...

turn signal switches my turn signal switch went out on my 94 geo tracker and im not sure how to install it. do i have to take apart the whole steerling wheel? No.first off remove horn pad in centre of

cant find the inertia switch where is the inertia switch on a 94 geo tracker there is not one. submit problem , dont guess. i have full docs on this car. you need to say 8vavles or 16 valves or ...

1995 GEO TRACKER BACK UP LAMPS WILL NOT COME ON Fuse good, bulbs good. there should be a switch on the trans for reverse, find it and see if you can by pass it ( connect the 2 wires together) if the ...

93 tracker turn key dash lights up no click nothing. Bypassed clutch safety switch still nothing. First, you might start with the quickie stuff: Make sure the neutral switch has not failed. Or the ...

1992 tracker will not start charged battery lites come on but will not turn engine ovr Replaced clutch. And alternator checked fuses The power for the starter solenoid goes thru the key switch then ...

94 geo tracker headlights won't turn on everything else works fine just the headlights do not turn on checked fuse box inside their ok You would need to use a meter or test light to find out if ...

...s in the manual, and is online. nut shell you remove the bezzel then the screws on the selector its not free. you unclamp each cable at the end, , all clamps on all cables. it now comes out. in 1996 ...

...extends fully
and the lamps still glow the switch is for sure bad.

and if the pedal is not damaged or spring
this adjustment works, if not, not.
as they say first things, ...

1996 geo tracker 5spd, low beams,tail lights and dash lights not working High beams work,all fuses OK, relay OK, changed headlight bulbs Unplug the neutral\park switch. This switch is located on top ...