Questions & Answers for: Kenmore not switching on

Question about 24032\24036 Top Load Washer

3 Answers

...washing machine by kenmore, can some one please help? i already replaced water pump but it did not do anything with my washer not draining or spinning, The symptom of a washer that fills

Ad

Question about 2.1 cu. ft. Portable Top Load Washer

1 Answer

kenmore washer 44722 water pumps out no spin. Brake actuator activates ,but motor does not turn on to make tub cylinder spin. Is this a Pump short or maybe control panel problem. Thanks,Ed Ed, I had a

Ad

Question about 2.1 cu. ft. Portable Top Load Washer

1 Answer

...Dryer won't stay on after switch is depressed. Our Sears clothes dryer (about 6-7 years old) will not stay on after pushing the Push-To-Start button. It would operate only if the switch was

Question about 2.1 cu. ft. Portable Top Load Washer

1 Answer

refrigerator inside light will not go out when door closes refrigerator light will not go out This can be due to one of two things, either the door is not hitting the light switch when it closes or ...

Question about 3.2 cu. ft. Plus Top Load Washer

1 Answer

My washer will not drain Hi, The most common cause of the problem you are experiencing is a lid switch malfunction. Symptoms may include, filling and stopping on the intial fill cycle, a wash tub that

Question about 600 6965 Electric Dryer

1 Answer

...eletri dryer 500 series has no power past the push swith If there is power up to the switch but not past it, the switch is likely bad. Over time the contacts inside the switch become warped. You ...

Question about 9381x Top Load Stacked Washer / Dryer

1 Answer

washer will not drain or spin The two things that cause this are the lid switch and the pressure switch. If the lid switch does not make it thinks the lid is open and it will not spin for safety ...

kenmore stylemaster 902202 will not spin, agitate or drain tub spins freely Check door switch: If the lid switch is bad it will not drain or spin. Try this test: With lid open let it finish wash cycle

Question about 24032\24036 Top Load Washer

1 Answer

...after filling Hi Anonymous I trust you are well There are a number of reasons the washer could not complete the cycle however with the limited information provided I suggest you look at the lid ...

Question about 24032\24036 Top Load Washer

1 Answer

Why is the agitator not working or not spinning? Water drains but not spinning Here are a few problems, The lid switch may be bad ( to check it )Raise the lid, find the switch. remove the 2 wires from

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machine Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...