Questions & Answers for: Kenmore will not start

...not start, so I pushed 'cancel' button and then re-entered 'start' button, still nothing happens. after a few seconds the start button light flashes My dishwasher Model is 665 15891790 and the serie ...

not start. Try gently pushing on the door as you push the start button. If no joy, then check to make sure that the latch mechanism (what can be seen of it - usually very little!) has no food deposits

...not start Hello, My dryer will not run or start unless I hold down the start button. When I just press the start button, it will not run. Your start botton wore out inside. You can change it. Please ...

...when first starts. Then the dryer has a different sound than before. Need to fix this before it leaves my wife stranded and does not ever start at all. Thanks Bad motor no doubt about it.Act ...

not start I just purchased a kenmore elite used, from the dealer. It will not start. I loaded it and all the lights come on put it will not start when you hit the start button. It seem like the lid is

...not start-timer goes seems to be power to everything but dryer will not start. Prior to this the dryer would start when timer was set and the door closed ----did not have to push the start button - ...

...not start Kenmore 800 110.79822800 dryer will not start. Set timer and will not start. Hold the start button and turn timer. It will start as I am turning but will go on and off as I am turning.could ...

...not start. Power is fine and the door is closing properly. The options lights are blinking whenever I hit start and the unit does not start Hi, There can be many reasons why your dryer will not start ...

...not start is that the start switch or the heating coil ? Hi, There can be many reasons why your dryer will not start or turn... The most common causes are the belt breaking or jumping off, or the ...

...i push the buttton to start it will not start when i push the button to start it will not start if it will not start when you press the start then you have either a bad door switch or a thermal ...