Questions & Answers for: Hotpoint does not agitate

not agitate All cycles with the exception of the agitator operate properly, but the agitator will not work. Where is the agitator solenoid located? Do you have to remove the tub in order to access the

...It pulls other clothes under. It has no screw on top, I have tried WD-40 and wedges but it will not move. Help please. Technically, the agitator should just pull straight up and off.

not agitate or function at all. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch.

...agitate YOUR MODEL IS NOT A CORRECT MODEL THE POSSIBLE STARTING LETTER WILL BE; G, H, M, P, Q, S, R, W OR X. AND THEN THE 1090 IS ALSO INCORRECT. YOU COULD HAVE A PROBLEM THE THE AGITATOR SPLINES ...

...agitate--is there a way to easily re-attach it? (Can't find model number, but it is gold, which looks like maybe the 70's??) Remove the agitator. The splines on the agitator transmission shaft need ...

top agetator is not working what do i look for top agitator is not working what do i look for well if the model number thats attached to this call is even close theres still 20 sub-models from ther. ...

...of the agitate shaft is not stripped. You should not be able to turn. To remove the agitator fill first about 8 in of hot water, drain and pull up on agitator with fingers under the bottom or a

straight out. There may be something, a piece of debris from a previous cycle, causing the agitator not to operate properly. Hope this helps

...belt, slip it under the agitator. Give a very hard yank and the agitator will pop up and off. DO NOT HAVE YOUR FACE OVER THE AGITATOR WHEN YOU PULL ON IT. It can pop up with force, and end up ...

not agitate. I can hear it trying to agitate the clothes but it's not, why is this? I set the load to regular with water level on medium and it's not overloaded. Please help. Cogs possibly bad.. Check