Questions & Answers for: nordictrack treadmill frame problems

belt goes full speed when started the shuts off thats it when i try to start the belt at any speed it goes all the way to full speed and shuts off the belt. or when i try to start it the belt moves a ...

...Nordictrack 2900 basically you will be just about to take your treadmill, almost totally apart. But the are not many nuts and bolts to solving your problem, first Lay treadmill on its side and locate ...

...treadmill begins operating again. May shutdown once while in use or 4 times. Timers and all other readouts except incline go back to zero. This sounds like a static electricity problem. First, check ...

treadmill and remove the motor hood cover. The reed switch is mounted on the frame next to the front roller pulley. There is a magnet glued into the front roller pulley. When adjusting the reed switch

...frame and make sure it is not tripped. The circuit breaker is a vertical switch on the 540S and a horizontal switch on the 540 Interactive Trainer. Press it to the "Reset" position, which will be ...

...Nordictrack has been fine for the past couple of years until recently when it started turning off intermittently with no power to the console. Now, the console will not turn on at all. The electrical ...

...with me after you lift up the treadmill into the stow/storage possition. Look at the front corners where the walkboard hooks to the frame, and you will see what holds the walkboard to the steel

NordicTrack T5.7. When I plug it in & turn it on, it seems as though the screen is "running" without the belt running & tracking an exercise without the safety key on. But when I put the safety key on