Questions & Answers for: nordic track walking belt replacement

Nordic track 1000 runs great for about 25 minutes then the belt stops working. The display is working. I have to use the stop button and wait a minute to restart the track. Then it will only run for a

nordic track a2350 and the belt stopped working, the incline works and the top part lights up. What do i need to do? This is usually related to the control pwb which is located under the motor "hood".

Nordic Track treadmill C1800. When first I have a Nordic Track treadmill C1800. When first turned on, it feels like the belt may be slipping and after 10 minutes or so it appears to be running normal.

nordic track treadmill's walking belt stops when I start walking on it but the motor is still running although the front roller is not moving when I start walking on the walking belt. Do you think the

Nordic Track treadmill trips GFI. My Nordic Track treadmill trips the GFI shortly after it is energized. I switched to another circuit and the same thing happened. I changed the power supply board but

...walking belt is slipping and drive belt shifted to the center of treadmill You will need to replace the drive belt inside the motor cover. and also tighten the rear roller bolts to tighten the walk ...

...Nordic Track C2255 drive belt? The belt on my Nordic Track C2255 treadmill started bogging down the other day while I was running on it. I took the cover off of the motor area and can see that the ...

...nordic track c2255 while walking on belt just stops, then just reset speed and it starts again walk for about 5 min and it stops again, restart and starts working again this happen to due the lack of ...

...to replace walking belt on a nordictrac c2000 Follow this video is not the same model but almost all treadmills have the same way to replace the walking belt:

how to instructions on replacing nordictrack c2000 walking belt check youtube.com and search Nordic Track belt. There will likely be a video from Nordic Track to show you how to do it.