Questions & Answers for: nissan tension pulley

...nissan sentra. How do I relieve the tension on the belt? Hi gj, It's easy and you won't need a prybar. Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar. For putting the belt on: ...

Ad

Question about 2003 Sentra

1 Answer

...GET TENSION OFF THE IDLER PULLEY TO TAKE OFF THE ALTERNATOR OFF THE NISSAN SENTRA 2002 loosen nut in center of idler pulley ..then loosen tension bar with 12mm socket til it walks away to remove ...

Ad

nissan pathfinder i had my belts changed july 2008 to stop the squealing sound, but the noise came back. I was told that I need to replace the a/c and the alternatoR tensioner bolts is this true It is

...belt and tensioner pulley on Nissan 2006 frontier 4 cylinder and need a belt diagram that shows where the tensioner pulley is. They are under the hood or on the front crossmember. Regards, ...

Question about 2003 Altima

2 Answers

...Pulley. e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them Let me know if this helped, or if you have additional information ...

Question about 2003 Altima

2 Answers

...Nissan Sentra 1.8 with A/C. I am turning the idler pulley clockwise to release tension, but it doesn't seem to be working... I can feel the center idler bolt tightening slightly but it will not lift ...

...Nissan Altima. what are steps? the first thing to do it locate the under hood diagram that shows the belt route. if there isn't one than be sure to make note or make your own diagram of the belt ...

...Nissan Altima 2.5L 4 cylinders engine:
- remove front wheel on passenger side
- remove plastic splash cover
- user 14mm offset wrench to turn belt auto-tensioner in clockwise ...

Question about 2008 Versa

1 Answer

...tension off surpentine belt tensioner - Nissan Forum www.nissanforums.com/.../151350-how-do-you-remove-tension-off.htm... Feb 20, 2009 - 4 posts - ?2 authors 2008+ Nissan Rogue ... QR25 2.5L Engine ...

...nissan maxima 3.OL i replace the timing belt and belt tensioner i start the engine with the timing cover off and the crankshaft pulley that's when i see the timing belt running a little off the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...