...of immobilizer system and new key only if you do it as registration a new key depending to the reprogramming tool that you use it replay & ask frr more details & information WITH MY BEST ...
...new key and get key programmed by dealer can remove barrel and key by removing steering column covers turn ignition to on position and with small shank screw driver push in hole in outer top rear ...
...new key made.if not then the key switch will need replacing and should come with 2 new keys if not and your second key is in good shape they can key the tumblers to your original key and have a new ...
...new key....you must take your ownership or pink slip to the dealer, he will be able to cut you a new key. If your key is one of the newer type with a chip in it then have the dealership set the new ...
Question about 1996 Civic
...and the key,your new key must have a chip,i think you should take your old key and the new key to your lock smith to cut a new key for the new cylinder with a chip to mach the old key ...
...new key for 1995 corolla car will not start new key will not have the chip inside to turn the immobilier off you need to take the old key apart and there is a black chip inside next to the key part. ...
Question about 2001 Expedition
...from the pcm , than marry the 2 new keys to the pcm. If you have an original key , try placing it by the lock cylinder when attempting to start with the key supplied with the new ignition
Question about 2008 3
...with no luck Hold your old key together with your new key and start the car. After a few seconds turn it off, remove the old key and restart it. If it starts, the car would recognize your new
Question about 2008 3
new key cause this? I bought a new keys could this cause the problem of cutting off? yes if chip inside key is faulty yes on new key but reason for new key --is ignition cylinder/switch worn --new key
Question about 2008 3
...new key you want to program into the ignition and turn it to the "On" position. Within 10 seconds, turn the key to the "Off" position and remove it from the ignition. Repeat steps 5 and 6 for any ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions