...much force while rubbing points with needle.just rub gently then check if it charge or not. if problem still stay with ur phone, then it take it to technician, then problem can be inside ur
Question about 7442 Mechanical Sewing Machine
When the needle passes below the plate area, it feels like it rubs against something. I'm not sure how to remove plate to see. Is this posibly an alignment issue, and if so,is it something I can fix? ...
why does my needle thread break too much tension on top or a burr on needle. Whenever thread breaks its usually the needle is bad. also check hook with finger for burrs caused by the needle. burrs ...
Needle stylus unit rubbing the record. When the needle is placed on the record to play, the needle stylus unit (the red plastic that holds the needle) touches the record & the needle barely touches ...
Question about 7442 Mechanical Sewing Machine
...needle can have a slight bend (from over use) and is rubbing on the throat plate causing it to break. and finally...your just not holding your mouth right! :) (...and sometimes this is really true!). ...
Question about 7442 Mechanical Sewing Machine
My automatic needle threader doesnt line up with the eye of the needle possibly the wrong needle length then . have never needed one myself . Perhaps the threader has been bent or has become loose or ...
Question about 7442 Mechanical Sewing Machine
My under looper is rubbing against both left and right needles. Then, sometimes if I go faster than a snail it will jump in front of the needles, breaking the thread. My overlooked was rubbing also, ...
Question about 7442 Mechanical Sewing Machine
in my 8770 the needle rubs onto the plastic plate under the bobbin and the bobbin will not grab to complete the stitch. Install a brand new needle. If the old needle is bent or damaged, it would ...
broken needle EVERYTIME IM SEWING THE NEEDLE BRAKE AND ALL THE LOOP ARE NOT COMPLETE ck the alignment of the foot plate (under presser foot) if needle rubs this plate it will break every time If the ...
Question about DU-1181N Walking foot Industrial Sewing Machine w/ Table & Motor
...the same motions watching to see if the needle/thread isn't rubbing on the hole in the feed dog. You may need to go down a size in your needle or modify your machine parts with emery cord. Good
Usually answered in minutes!
8,663 Questions
6,597 Questions
5,420 Questions
5,130 Questions
4,425 Questions