Questions & Answers for: needle grabbing bobbin thread

needle won't grab bobbin thread I can move the needle up and down manually but it feels stiff. I was sewing fine when all of the sudden the bobbin thread started looping. I started over by rethreading

...needle on my Brother VX-808 now the machine will not sew. The top thread is not grabbing the bobbin thread. I have taken the bobbin case out , removed the shuttle and put back. It runs as if it is ...

Needle hits the bobbin holder and doesn't grab the bobbin thread It is like the bobbin holder is in the wrong position. The needle keeps hitting the metal part of the holder and won't grab the bobbin ...

...needle will not grab bobbin thread so I can begin sewing. you might check your needle to see if it's bent check in the bobbin area for any lint or loose threads make sure there is a bobbin tail at ...

needle won't grab thread from bobbin Sometimes you have inserted the needle wrong, make sure that the needle faces the rear, if that is not it, try a new needle. Make sure that you have threaded the ...

...needle correctly and the bobbin seems to be in the right position. The needle doesn't look like it's making contact with the bobbin. Make sure that you have the needle's flat side facing the rear of ...

...needle to grab on your bobbin thread (sometimes it won't grab if there's not much there) -Have all your lower pieces in and secure. (Mine tend to jump around if I'm not putting 'em in ...

...bobbin holder The needle thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. ...

I have the following correctly installed: needle, thread, bobbin, Shuttle Race, but my needle will not pick up the bobbin thread. Please put on correct size needle. And check the tension & timings

...206rb bobbin won't loop and grab needle thread the needle thread should form the loop which is grabbed by the hook. before getting too involved with timing etc, clean bobbin area a fit a new ...