Questions & Answers for: needle bent

...base plate about 1mm on the far side of the hole. sounds like a bent needle. did you try changing it to a new one? I have gotten bent needles new in package before so try a couple out...hope it ...

...needle being bent. It may not look bent, but be ever so slightly bent that you can't even see it with your eye. The best thing to do is to change your needle, make sure you are inserting it with ...

...needle may be bent or damagedthread may be hanging up in bobbin case--check area for loose threads or lint the needle may be bent or damagedthread may be hanging up in bobbin case--check area for ...

...Needle is not bent. Can't sew. Needle hits zig-zag plate. Needle is not bent. Replace the needle anyway, it's probably blunted now. Also narrow the zig zag width. But your machine needs ...

needle hitting pressor foot needle hits pressure foot when attempting to sew and breaks needle Presser foot not correctly mounted, or needle bent, or needle bar loose or bent are the most likely.

...bent needle check for correct needle First, check what plate is inserted and what stitch is in use. There are some sewing machines that have a straight stitch plate. This can only be used for a ...

needle bent or blunt 3. Machine is not threaded properly, rethread using every thread guide 4. Wrong needle for the fabric being sewed First thing, try a brand new needle. A bent needle will sometimes

...feed dog hitting bobbin. Clunking is very loud Needle is replaced, cleaned?? check the needle hook timing bent needles hit the feed dogs and needle s bent when hit by the bobbin carrier and ...

...needle got bent. Replace needle and don't pull the material. Let the foot do the work. The needle is most likely bent. Replace it immediately with a brand new needle. If the needle continues to hit ...

...bent or damaged. The needle threader is designed not to turn, if the needle is not at its most upper position to protect the threader - Turn hand wheel until needle reaches its highest position. ...