Question about 2000 XL Sportster 883
...not getting power to light my wife has a 1999 sporty . no power to the light or switch . i need an owners manual you can get a manual online for about $50 go to clymer.com they will have what u ...
...Remedy:- if it's brighter thn it is probabley the brake light switch which mayhave siezed or needs adjustment. I have a feeling it is the brake light tht is staying lit all the
...switch. If you need a schematic, I will send you one if you'll contact me directly. This forum will not allow an attachment of over 150kb. Contact me at [email protected] and I'll send you an ...
...need to get out your test light and find the short and start by making sure the battery has 12 volts or more and clean tight connections especially the ground cable at both ends. If your issues ...
...have power to my brake light switch or horn switch cant find any fuses I can send you a schematic if you'll contact me directly at [email protected] . Please remind me of what you need. ...
...switch. You need to check for voltage. Then there is another wire that comes from the start switch and a wire that goes to the backside of the starter. If you have a test light, find the single small ...
.../ no spark at plugs There is power to the coil but no spark to plugs Hi Anonymous, the CKP sensor needs compression to send correct signal to the ICM/ECM, make sure both spark plugs are in heads
no power when turning key Check the battery, if it is charged, You need a new ignition switch
...switch. You need to align the groove with the protruding area that the ignition switch bracket protruding area. That should be the only way the switch will go through the ignition switch mounting ...
...need to get out your test light and start tracking down the short. Start at the ignition switch, then the handlebar switch housings and work your way back to the fuses. For a free wiring diagram ...
Usually answered in minutes!
109 Questions
92 Questions
