Questions & Answers for: Smeg need switch

...need a replacement switch they are normally quite simple to change depending on where they are located, most are two screws, or just a push in type. Hope this has been of some help. how do you ...

...door switch need to replace door switch on fab28 but cant see how it comes apart? Try taking the knob off with a knife, under that there are 2 long screws, another screw is under the light bulb

...If this switch is defective, or if the plastic float gets caught or trapped in the raised position, the water can't enter the dishwasher. If the float switch is defective, you need to replace

...switch that you can use. It is used in a dishwaher to make sure that the water doesnt over fill and spill over out of the dishwasher and electricute someone. it cuts off the water (when working ...

...need to replace it. The thermostat is located behind the temperature selector switch on the control panel. The oven thermostat usually has a capilliary tube attached which goes in to the oven ...

...need to do E2 shows that the water level switch has been tripped or its faulty,interupt the programm and switch off the dishwasher then switch it on ,programm it again and start the washing cycle ...

...just tripped this switch and fused the globe. remove the globe cover(quater turn anti-clockwise) and globe and reset switch. Of course you need also to set the digital clock, or oven will not

...need to slam the oven door to switch off the intenal light and make the oven work? We need to slam the oven door to switch off the internal light and switch on the oven. How can I clean/fix the door ...

...back incorrectly and part of the hinge pushed the metal lever that activates the switch upward, and jammed it there. You need to get a bit of wire and hook it down again so that it covers the

the back of the fridge, this is no longer there. The light switch in fridge the door has died & needs 2 b replaced!!! Maybe can be replaced by a generic switch?