Questions & Answers for: nail through a wire what should i do Car Audio & Video

...nail gun. I have Paslode brand nails (30 degree full round head, 3x.131 smooth). I just want to ensure that these will work in the gun i am renting. i would like to not have to purchase more nails. ...

...nail is ,using a volt meter or a test light ground a long wire to the breaker box or other known ground. hook that to 1 side of the meter. then test the heads of the nails with the other lead with ...

...nail wire is located in the wrong spot which will cause the feed pawls to get jammed, and also cause the nail to get hung up. After you get the nail dislodged make sure that your canister is set to ...

...wire as it drives a nail. This jerks the clip forward forcefully forcing more than one nail into the chamber or causing the next nails in line to rotate slightly, thus exposing the unclipped portion ...

nail feeder or wire used to weld nails together is too thick.  I am in no way a roofing expert, but I recently made a dog house and used a nailer where I was having the same problem. I think that

...wire in front of the first nail preventing good alignment to driver. If you are going to depend on your nailer for daily work, order and have in stock upper bumper and cylinder seal. These parts ...

...wire will not allow the nail the fully move into the path of the driver. Stiff wire will also cause the next nail in line to pull down slightly. When nail is pulled down slightly, it will be out of ...

wire.  After the first nail is driven, the second nail will have one or two strands of wire pointing out not allowing the nails to move into position.  After first shot, the two wires should

...wire collated nails are a Stanley-Bostitch thing and they only work in their nail guns, they will not work in your nail gun. You need 34-degree, paper-tape collated nails. I know Senco framing nails ...

...wire welded to each unit. For a nail to just drop out of the nose, the two strips of wire would have to be broken or not totally welded to the nail. Poorly constructed nails will have bad welding or ...