Questions & Answers for: RTO nail through a wire what should i do

Question about PasLode 900420 Impulse Framing Nailer

2 Answers

...ring grooves? Let me know if you have any questions I had the same problem with my angled finish nailer. After pulling apart the nailer to clean it and check all the wiring, I discovered that the ...

Ad

Question about PasLode 900420 Impulse Framing Nailer

9 Answers

...wire from the plug. Insert a small nail or any metal object that will stay in place in the boot and hold it a little ways from the metal body, pull the trigger as if you were firing a nail. Do this ...

Ad

Question about PasLode 900420 Impulse Framing Nailer

1 Answer

the lite is green /fan runs when depressed /nails are loaded and no pop. doesnot fire First, make sure you gas is not expired, it has a date on it. Next, Make sure your green light comes on. Does the ...

Question about PasLode 900420 Impulse Framing Nailer

1 Answer

does not fire the nails when you pull tjhe trigger but the gas and fan still work First, make sure you gas is not expired, it has a date on it. Next, Make sure your green light comes on. Take off the ...

Question about PasLode 900420 Impulse Framing Nailer

1 Answer

will onlyshoot one nail and quits First, make sure you gas is not expired, it has a date on it. Next, Make sure your green light comes on. Does the fan come on when you press it down? Take off the ...

Question about Paslode 902000 IM250 Ii Cordless 16 Gauge 3/4 2 1/2 Inch Straight Finish Nailer

3 Answers

...wire "toothbrush" size brush, clean the track in front of the gun where the pin slides - where the nail groove is. **** particles from the nails and the plating from the nails sluffs off fouling the ...

Question about PasLode 900420 Impulse Framing Nailer

2 Answers

...to red but battrey are ok I would take it apart and press head switch while activating gun(without nails). If you have no spark at the spark plug, it is either the spark plug, lead wire or spark ...

Question about PasLode 900420 Impulse Framing Nailer

1 Answer

impulse gun wont fire and fan doesnt run green light on handle flashes I have a full clip of nails in it , fully charged battery, but the fan wont run and my paslode impulse framing nailer wont shoot ...

Question about PasLode 900420 Impulse Framing Nailer

1 Answer

My paslode impulse framing nailer quit working. It fired and the fan shut of prematurely then it would not fire and the fand would not run. The blinking green LED light in the handle is blinking green

Question about Paslode 902000 IM250 Ii Cordless 16 Gauge 3/4 2 1/2 Inch Straight Finish Nailer

1 Answer

The trigger doesn't engaged. New cell, battery charged, fan works, full of nails, nothing jams. The trigger doesn't engaged. New cell, battery charged, fan works, full of nails, nothing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top RTO Air Tool and Compressor Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a RTO Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...