Questions & Answers for: nail through a wire what should i do

Ad

Question about Bostitch N80CB Coil Framing Nailer

2 Answers

...nail gun. I have Paslode brand nails (30 degree full round head, 3x.131 smooth). I just want to ensure that these will work in the gun i am renting. i would like to not have to purchase more nails. ...

Ad

Question about Bostitch N80CB Coil Framing Nailer

3 Answers

...nail is ,using a volt meter or a test light ground a long wire to the breaker box or other known ground. hook that to 1 side of the meter. then test the heads of the nails with the other lead with ...

Ad

Question about Bostitch N80CB Coil Framing Nailer

1 Answer

...nail wire is located in the wrong spot which will cause the feed pawls to get jammed, and also cause the nail to get hung up. After you get the nail dislodged make sure that your canister is set to ...

Question about Bostitch N80CB Coil Framing Nailer

2 Answers

...wire as it drives a nail. This jerks the clip forward forcefully forcing more than one nail into the chamber or causing the next nails in line to rotate slightly, thus exposing the unclipped portion ...

Question about Roofing Coil Nailer AN451

1 Answer

nail feeder or wire used to weld nails together is too thick.  I am in no way a roofing expert, but I recently made a dog house and used a nailer where I was having the same problem. I think that

Question about ZRR175RND FactoryReconditioned 134" Roofing Coil Nailer

1 Answer

...wire in front of the first nail preventing good alignment to driver. If you are going to depend on your nailer for daily work, order and have in stock upper bumper and cylinder seal. These parts ...

Question about Coil Roofing Nailer

1 Answer

Jam

...wire will not allow the nail the fully move into the path of the driver. Stiff wire will also cause the next nail in line to pull down slightly. When nail is pulled down slightly, it will be out of ...

wire.  After the first nail is driven, the second nail will have one or two strands of wire pointing out not allowing the nails to move into position.  After first shot, the two wires should

Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer

1 Answer

...wire collated nails are a Stanley-Bostitch thing and they only work in their nail guns, they will not work in your nail gun. You need 34-degree, paper-tape collated nails. I know Senco framing nails ...

Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer

1 Answer

...wire welded to each unit. For a nail to just drop out of the nose, the two strips of wire would have to be broken or not totally welded to the nail. Poorly constructed nails will have bad welding or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1420 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

206 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you an Air Tools & Compressors Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...