...vehical, sounds too new for this problem, also it could be that u need a new shifter cable.... Try disconnecting cable at the trans and see if it move easyer, if it does than trans problem....in ...
...mustang won't come out of park,brake lights coming on and I replaced it anyway can it be the ignition switch or is there a solinoid that releases the cable to the shifter button ? Thanks Is the ...
...mustang with 3.8 v6 and automatic transmission I put the car in park then i put it in reverse and backed out my driveway and then i put the shifter in drive and the car was still in reverse i tried ...
Can not move the gear shift to park Shifter cable needs replacement or adjustment or shifter release button is seized.
...shifter is binding when going into park. Car is a 2006 mustang with v6 and automatic look under car on drivers side of transmission...shift cable may be loose..try to push it in as far as
...do. go to the ford dealer parts department and they can get you the part and help you with information on how to install it.by the way the cable is not under the car its part of the shifter
2000 FORD MUSTANG WILL NOT DISENGAGE FROM PARK if its an automatic its prob the shifter cable if so its about a 60 to 70 dollar part
...mustang gt 4.6 litte The throw out bearing slides on a collar behind the input shaft on the front of the transmission inside the bell housing. It will require removal of the drive shaft, shifter ...
Question about 2000 Mustang
...Mustang (4.6 or 3.8 doesn't matter, it's the same transmission). You'll also need the pedal assembly, shifter assembly, ecu from a 5-speed, 5-speed drive shaft, clutch and clutch cable, and ...
Question about 2000 Mustang
...mustang has a stiff shifter and is hard to put from park to other gears and vice versa. What is its problem and how do I fix it? The shifting cables can go bad and freeze up. If your mechanically ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions