...Error code 0305- Cyl. # 5 Misfire. I've changed the spark plugs, and wires. That didn't help at all. The engine seems to ok untill the RPM gets up to about 4000 rpm then it starts to cut out and the ...
multiple cylinder misfire detected" but I'm at a loss what more I need to do. I've replaced the fuel filter, fuel pump, changed spark plugs, coil housing, spark plug boots and it's still missing. I've
...error codes 300 and 302 help The PO300 code is random/multiple cylinder misfire detected. Sinsc you have the code PO302, that means that cylinder 2 is the one misfiring, usually a bad coil pack, or ...
...error code meaning --------------- ------------- P0107 MAP (manifold absolute pressure) sensor - low input (to computer) P0108 MAP (manifold absolute pressure) sensor - high input (to computer) P0122 ...
...probably set a code identifying a failed ignition module. On the other hand, sensor errors can have multiple causes. Try to get the values measured by the various sensors and compare them with normal ...
...multiple cylinder misfire error code(p0300) . You cleared out the O2 error and wrong type plugs can cause O2 sensors to go out. Now this is just a suggestion. Try not to panic as this can be a simple ...
...error codes. Code P0131 is your Oxygen sensor that needs to be replaced. This could cause the other code which is P0300-Random Multiple Misfire although this is usually caused by one of two other ...
Question about 2003 Grand Am
...error code p0300 and p0340 they said it dont have a cam position sensor DTC P0300 - Random/Multiple Cylinder Misfire DetectedBasically this means that the the car's computer has detected that not ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,496 Questions
