Questions & Answers for: mtx thunder power light

Question about Thunder TA7801 Car Audio Amplifier

2 Answers

...blow the fuse as soon as you apply power. hi i have the MTX thunder 7801 and it doesnt do anything everything is connected as the manual says but i get a red light with service only what can that

Ad

Question about Thunder TA7801 Car Audio Amplifier

1 Answer

MTX Thunder TA81001 amp when truck is running and radio is on, voltage is ok, but when i turn the amp on, lights dim one to two seconds, and no other problems util the power is turned off, this is ...

Ad

Question about Thunder 895 Car Audio Amplifier

1 Answer

...mtx thunder 300xd car amplifier "is the got two wires in the ground and remote turn on wie" Can you be more specific about the wiring...where the two wires are connected to and where they come from, ...

Question about 4004 Car Audio Amplifier

1 Answer

mtx thunder 4004 when powered up light turns on for about 2 seconds then turns off and wont come back on until power is removed then hooked back up. check for shorted output transistors

Question about X Thunder 702X Car Audio Amplifier

1 Answer

Apx stopped working, MTX 702x Amp stopped working, now has the power light going from a solid red to blinking fast, then solid.... maybe the audio amplifiers Ic´s damaged or the power fet

Question about Thunder 6500D Car Audio Amplifier

1 Answer

...fuse it is a mtx thunder 6500 d running a 10 inch thunder 5500 any advise? Sorry to say mate but that is one blown up amp! :( My solution to this would be to get another amp Sorry Matey Upfront ...

Question about Thunder 2-Channel Amplifier 502 Car Audio Amplifier

1 Answer

...MTX thunder 502x was working fine and know the amp light is flashing yellow and red. i have checked the fuses and disconnected the power and ground and reconnect, same problem. it continues even when ...

mtx 1000xd led light is flashing and the subs will not work i have testes the subs and they work fine but the amp wont power them The light flashing usually means there is a short somewhere. Check ...

Question about Thunder 421D Car Audio Amplifier

1 Answer

...subs mounted in power wedge enclosure hooked up to a MTX thunder 4300x amp. One sub speaker has no sound and the amp has a red light that is always on? the amp is under to much pressure get a bigger ...

Question about Thunder 251D Car Audio Amplifier

1 Answer

...mtx 251d thunder and still no light i check my connection is ok , if i do jumper it with the antenna and main power the light is on, i,m getting frustrated My guess is a short in your 12 volt remote ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Car Audio & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...