Questions & Answers for: Hobart mp258 p2 error


Question about 24 in. LXIH-3 Built-in Dishwasher

3 Answers

...P2 Error and unit overflowing! My Hobart displays a wrench and the P2 error code. Then last night it just over flowed all over my floor. I shut it down and turned it back on and it did the same thing ...


Question about 25 in. LXIH-4 Built-in Dishwasher

2 Answers

...P2. If it can't determine the wash tank temp, it won't know to control the heat and shows the error. eo/dr1 indicates no water @sump probe for 3 conc. cyc. sounds like you have a bod drain valve or ...


Question about 29 in. AM15-1 Free-Standing Dishwasher

1 Answer

E2 error code keep triping What is the exact model number and ml number?Is it definetly a e2 error or p2?

Question about 24 in. LXIH-3 Built-in Dishwasher

1 Answer

...P2 ERROR CODE? WON'T DRAIN COMPLETELY - HELP HOBART LX30H - P2 ERROR CODE? WON'T DRAIN COMPLETELY - HELP PLEASE the p2 err. is on open or shorted rinse thermistor which is located on the back of the ...

Question about 29 in. AM15-1 Free-Standing Dishwasher

1 Answer

Hobart AM15T ML-130039 with p2 message, what does this code mean Im on a ship and we have a Hobart AM15T ML-130039 dishwasher and the display shows p2 message. What does the p2 message tell you. I ...

p2 error, replaced rinse probe, hi limit thermostat, still have an error p2 Thinking it may be a control board issue, 892932 since everyone says p2 error is rinse thermistor. Thanks for the help!! P2 ...

Question about Undercounter Dishwasher, Hot Water Sanitation, Fresh Water Rinse, Delime Notification-LXIH-4

1 Answer

after replaceing my rinse probe i'm still getting the P2 error code how do i clear the code. that is the case and need to look into control PCB.

...a wrench symbol and error p2. Also the vacuum breaker is leaking at rinse. Could it be my rinse thermistor? Any help would be greatly appreciated. Thanks. Yes, P2 is failure on rinse temp

...the water supply on with the dishwasher in an off position, water continually fills and eventually overflows the tub. Error codes p2 with a wrench. Machine fills with power off Fill valve is stuck ...

...P2 error code displaying with a wrench displaying on the left top corner. i have nt been able to locate this error code in the manual? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hobart Dishwasher Experts


Level 1 Expert

12 Answers


Level 2 Expert

218 Answers


Level 3 Expert

85222 Answers

Are you a Hobart Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides