Questions & Answers for: mower want pull on hill

...up speed. Whenever I try to go up a small hill it keeps running but dont have enough torque to pull the hill. Whats my problem give as the model so we can help. A worn drive belt, or lack if a ...

...mower won't pull uphill After mowing for a while my riding mower won't pull itself uphill. To make it pull I have to release the drive pedal then depress it again and I may have to do this more than ...

mower wont pull under load after abot 30 minutes of cutting i have adjusted all the linkages and got it to pull alittle better but it still does not want to pull up a hill after about 30 minutes of ...

...Mower cuts fine going up hill when engine is pulling but doesn't cut at all when engine seems to be braking. Sounds like a loose belt check the tension spring if they ok check and see if belt is ...

...mower with a 7 hp briggs.the problem i have is it wont pull very well or at all going up hills and sometimes i have to push it to get it started moving what do i do? The drive belt that pulls maybe ...

...the mower to not pull on a hill  you can pull on the belt and if it's flopping around  also look at the belt for signs of oil oil leaking on the belt will also cause the belt to ...

Does not want to pull up hill Does not pull up hill well, does it have a place to check fluid level? there is a plug  of the axle can't always get to it also check the drive belt 

mower works good.thanks papawpt Sounds like a problem with the governor. Start it up. Don't engage the blades. Drive to a hill. Idle all the way down. Try driving up the hill. The motor should pick up

...mower? operates great for 15 minutes then want pull up the hill in my yard. let it sit until it cools off and it will pull the hill again for another 10 to 15 minutes. Will do ok on level ground even ...

L120 cuts great but wont pull up a hill Tractor mows great on flat ground but won't pull up a hill replace the drive belt .they do wear out