Questions & Answers for: moving parts

...moving parts underneath and urinated and so forth on the working parts. My dad had go in and use a break-free lubricant and physically force the gears to move again in order to free up the working ...

Moving Parts Parts on the inside of the MP3 are moving around. If it is moved, the device turns itself off. Anyone that had this problem? Find out if the warranty is still good, and get it replaced ...

I have an older 1998 portable Bernina with feeder problems. The control knob for the drop feed won't move the machine won't move the material forward when I sew. I opened the bottom and oiled all the ...

...moving unit I moved the unit to another part of the house. It was working when I moved it, but wouldn't heat up when I plugged it back in in the new location. It shows it has power, but doesn't heat. ...

...moving parts tend to congeal and harden up when it gets cold. Spray the moving parts with carb cleaner being careful not to spray any electrical switches of open wiring. Mechanical parts only. Hope ...

my chain on my husqvarna 435 x-torque power saw will not move when i don't have the protective plate on the saw the chain will move but when i put it back on the chain wil not move. the brake is off ...

the airduct to the metal piece it attaches to. Then move the engine part again and see if a flap is moving or binding. There is an electrical part called a TPS which attached to the shaft of the flap.

...ribbon moves but the part that moves the ribbon is missing how do I replace it? How do I remove the moving pin so that I can fix the part that latches onto the ribbon cartridge to move the ribbon? ...

...moving parts starting from the left; the needle arm and pressure arm. Then take off the top and watch the moving parts and oil the moving parts. Do the same underneath the machine. The main thing to ...

...moving parts. Without motor oil, the engine gets no lubrication of moving parts and it over heats severely. Then moving parts expand in size and will seize up permanently. Your engine will have to be ...