Questions & Answers for: motor drag

...motor on my 84 ford f150 straight 6 4.9l 300 and my old starter would drag on a hot start so i got a heat shield for it and it fixed the problem for a while. it started to drag again so i got a new ...

drum is making nosie like it dragging drum is making noise like it dragging Your motor that turns the drum could be going bad or the drum might be slowing down due to the axle it turns on might be ...

...this with power off - manually rotate the turntable and look for where drag might be. You should be able to feel the drag. It is possible you didn't route the belt properly. where can i buy a motor

...until you stop then push again then drags again. Here is what I did sofar. 1- remove the brake from motor and tie it to the side. 2- I left the brake connection intact. 3- I connected a DVM to the ...

...for few feet then I get a reading of 19.2 that's when starts dragging. I removed the brake of the motor and tie it to the side with wire connected. still drags after few feet. I removed battery

What is draggin on my motor I changed the thermostat and now my motor seems to drag That shouldn't have anything to do with the dragging you need to take your starter off and get it checked

2004 dodge neon motor dragging 004 dodge neon motor dragging Do you mean its running too slow when idling? Its 10 years old, when was it last serviced?

...and thus causes the thermal overload safety switch [inside the motor] to "open" thus PROTECTING the motor from overheat damage. The only fix for this is to find, AND ELIMINATE, the drag or

Easy Lock 804D. Why did motor start dragging, then barely moved? Motor started dragging then stopped within seconds. Sounds like it has seized due to lack of cleaning and oiling. Should probably take ...

...was dragging but spindle was turning, Stopped running. Has power to plug, spindle freely turns but motor doesn't work The router motor has much in common with the humble vacuum cleaner motor - the ...