...developer unit. another technician, familiar with sharps said that it could possibly be the main motor which drives that section. i put it into maintenance mode, did the main motor test and it ...
...should reset. If the code returns, you need a laser unit replaced. 200-300 dollar repair. Main motor lock detection Detail When the main motor encoder pulse is not detected for 100 msec. Cause ...
Question about AR-5316 Advanced Digital Imager Copier
...line connector and harness. Replace sorter control PWB or PCU PWB. F1 02 Content Sorter transport motor error Detail Transport motor drive trouble Cause Motor lock Check and remedy Check transport ...
Question about AR-5316 Advanced Digital Imager Copier
...working and its blinking L 4 signal please advise me what could be the problem? L4 01 Content Main motor lock Detail The main motor encoder pulse is not detected for 400msec. Cause Main motor defect ...
how do I fix L4-31 error code? error L4 01 Main motor lock detection Cause: Main motor unit abnormality Improper connection or disconnection the main motor and the harness. Check connection of the ...
...... my machine sharp a 235 say call for service lp 6-10 what dos it mean L6 10 Content Polygon motor lock trouble Details The polygon motor does not rotate. The motor lock signal is detected for ...
ERROR CODE L6 ERROR CODE - L6 Polygon motor lock detection Detail : The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor ...
Motor does not run properly Toner & developer is changed but light is blinking and motor does not run normaly when you start for the first time What motor are you talking about the fuser motor, paper ...
SHARP AR5620SL CODE L4 Code: L4 01 Description:Main motor lock detection. The main motor does not rotate. After rotation of the main motor, the motor lock signal is detected for 1 sec or more. During ...
...M236 CALL SERVICE CODE L6-10 Hello I found this for your error code. Code L6-10 Description Polygon motor lock trouble The polygon motor does not rotate. The motor lock signal is detected for 6sec or ...
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
331 Questions
354 Questions
